Publish Time: 2020-04-21 Origin: Site
The Core Warpage
| The possibility | Solution |
| The steel core has been overheated | Supply sufficient water and make sure water pump is producing sufficient water. |
| The blade is spinning on spindle | Check spindle and arbor hole for damage. |
| The steel core is rubbing excessively against the material being cut. | Maintain a firm grip on the material and secure the machine firmly |
| The blade is run at an improper operating speed | Make sure the blade is operating at the manufacturer's suggested RPM |
More details about diamond saw blade,
please visit our website:www.sangtools.com
E-mail:info@sangtools.com
Tel:0086-595-22699555