Resin bond polishing pads are commonly used in the concrete polishing industry to achieve a high-gloss finish on concrete surfaces. When working with wet polishing techniques, these pads can be used with water to cool the surface and minimize dust.
To use resin bond polishing pads for wet polishing concrete, follow these general steps:
Prepare the surface: Ensure that the concrete surface is clean and free of any debris. Repair any cracks or imperfections before starting the polishing process.
Choose the appropriate grit: Resin bond polishing pads are available in various grit sizes, ranging from coarse to fine. Begin with a coarser grit pad to remove any surface imperfections or existing coatings, and gradually work your way up to finer grits for a smoother finish.
Attach the pad to a wet polisher: Resin bond polishing pads typically have a Velcro backing, allowing them to be easily attached to a wet polisher. Make sure the pad is securely fastened to the polisher's backing plate.
Wet the surface: Before starting the polishing process, wet the concrete surface with water. This helps to cool the surface and prevent heat buildup during polishing. You can use a sprayer or a hose with a misting nozzle to evenly wet the area.
Start polishing: Begin polishing the concrete surface using the wet polisher and the attached resin bond pad. Move the polisher in a circular motion, overlapping each pass to ensure even coverage. Apply light to moderate pressure, allowing the pad to do the work.
Progress through grits: After completing a pass with the initial grit pad, switch to a finer grit pad and repeat the process. Continue this step, gradually increasing the grit size, until you achieve the desired level of smoothness and shine.
Clean and inspect: Regularly clean the concrete surface and inspect it during the polishing process to ensure that you're achieving the desired results. Remove any residue or slurry between grit changes to prevent contamination.
Final polishing steps: Once you've reached the finest grit pad and achieved the desired level of polish, you can proceed to the final polishing steps. This may involve using a polishing compound or a densifier to enhance the shine and durability of the polished surface.
Remember to follow safety precautions when working with power tools and abrasive materials. Wear appropriate personal protective equipment (PPE) such as goggles, gloves, and a dust mask to protect yourself from potential hazards.
It's important to note that specific techniques and recommendations may vary depending on the type of concrete, the condition of the surface, and the equipment you're using. so it's always recommended to check with us for the most up-to-date information on specific brands or models of Abrasive Tools Wet Polish Concrete Resin Bond Polishing Pad
FAQ:
1.Are you a manufacturer or trading company?
We are a 30 years manufacturer.
2.How to prove your quality?
We use E6 diamond,Dipea steel wire, passed ISO9001 and SGS,strict quality control and skilled workers.
3.What should I do if the products is not suitable for the market?
Giving us the detailed report first,then we analyze the reason,try to find the solutions.
If it is our problems,we will give you new products.
4.Do you provide free samples?
Small sample is welcomed.But,usually we don't provide free samples.
5.Can you provide OEM/OEM services?
It is ok.