Wire saw for concrete has been widely used in the stone industry, machinery industry, and building construction field, mainly for stone mining and processing, reinforced concrete building demolition and trimming, glass, and other hard and brittle materials processing. Next, is the introduction of wire saw for concrete construction points.

Drill bit quality, bit type, and formation lithology are appropriate, to speed up the drilling speed, improving the long concrete drill bit into the footage plays an important role. Generally speaking, a variety of drill bits of different sizes are used to drill an oil and gas well, and larger diameter bits are used to drill the upper layers. As the concrete drills into a soft formation, a single bit feeds long and short, a bit can generally be used repeatedly for several wells; while drilling the lower formation should use a smaller diameter bit, because the formation is hard, a single bit feeds less, usually using more than one bit. The feed rate of the new long concrete drill bit depends mainly on the size and type of the bit, the hardness of the formation, and the matching of drilling parameters. In general, the smaller the bit size, the harder the formation and the lower the feed rate.

The

Commonly used concrete grinding discs mainly include the following:---Polycrystalline diamond (PCD) grinding disc: used to remove epoxy coating, it is needed when the coating is thicker;---Concrete diamond grinding disc: used for concrete floor leveling and old floor renovation;---Concrete thick pol

In recent years, more and more customers choose concrete curing floor. Therefore, we have summarized its advantages.1. Strong and wear-resistant, durableWhether it is a factory, a warehouse or a parking lot, the requirements for the ground are strong, wear-resistant, and durable. The general epoxy f

Everyone knows that the emery wear-resistant floor can withstand a certain amount of pressure, can also create different colors, and it can repair the tunnels of the entire ground, and has the advantages of durability, wear resistance, dust resistance, and easy cleaning. How to control emery The qua

Diamonds do not cut. They grind the material they come into contact with into a fine powder.1. Grinding is done through exposed diamond crystals, which are held in place by a metal matrix or bond. When the blade rotates on concrete, the exposed diamond grind concrete.2. The exposed diamond begins to

Concrete cutting discsConcrete, is a solid substance that easily crumbles or forms chips. Therefore, its processing requires precision and sufficient power of the working tool.To meet these requirements, we use diamond saw blade for concrete, cutting and grinding .When working with any hard materia